Oracle X8-8 Installation Manual Download

Page: 114 / 134

Options for Accessing Firmware and Software Updates

■

For the CLI, at the command prompt, type:

show /System

The ReadMe document that is included with each patch in a software release describes

components changed since the last software release and bugs that are fixed with the current

release.

Options for Accessing Firmware and Software Updates

Use one of the following options to obtain the latest firmware and software updates for your

server:

■

My Oracle Support

– All system software releases are available from the My Oracle

Support web site at

https://support.oracle.com

For information on what is available on the My Oracle Support web site, see

“Software

Releases” on page 114

■

Other Methods

– You can use Oracle Enterprise Manager Ops Center, Oracle Hardware

Management Pack, or Oracle ILOM to update your server software and firmware.
For information, see

“Installing Updates Using Other Methods” on page 117

Software Releases

Software releases on My Oracle Support are grouped by product family (such as Oracle Server),

the product (specific server), and the software release version. A software release contains all

the updated software and firmware for your server as a set of downloadable files (patches),

including firmware, drivers, tools, or utilities, all tested together to be compatible with your

server. Each patch is a zip file that contains a ReadMe document and a set of subdirectories

containing firmware or software files.

The set of software releases for your server are described in the following table. You can obtain

these software release packages by downloading the files from My Oracle Support.

Package Name

Description

When to Download This Package

X8-8 SW

release

– Firmware Pack

Contains all system firmware,

including Oracle ILOM, BIOS, and

option card firmware.

You need the latest firmware.

X8-8 SW

release

– OS Pack

Includes a package of all tools,

drivers, and utilities for a specific

You need to update OS-specific

tools, drivers, or utilities.

114

Oracle Server X8-8 Installation Guide • June 2019

Summary of Contents for X8-8







































































































































Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands

Oracle X8-8, Installation Manual

Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands