manualshive.com logo in svg

Oracle X8-8, Installation Manual

Share
Download
Oracle X8-8 Installation Manual Download Page 113

Getting Firmware and Software

This section explains the options for accessing server firmware and software updates using My

Oracle Support. It also describes how to use the Oracle Software Delivery Cloud to download

operating systems and software applications.

Customers are required to install the latest available operating system (OS), patches, and

firmware versions for optimal system performance, security, and stability.

■

“Firmware and Software Updates” on page 113

■

“Options for Accessing Firmware and Software Updates” on page 114

■

“Software Releases” on page 114

■

“Getting Updates From My Oracle Support” on page 115

■

“Download Software Using Oracle Software Delivery Cloud” on page 116

■

“Installing Updates Using Other Methods” on page 117

■

“Oracle Support” on page 118

Firmware and Software Updates

Firmware and software for your server are updated periodically. These updates are made

available as system software releases. Each software release contains a set of downloadable

files (patches) that include firmware, software, drivers, tools, and utilities for the server. All of

these files have been tested together and verified to work with your server.

Update your server firmware and software as soon as possible after a new software release

becomes available. Software releases often include bug fixes, and updating your server ensures

that your server has the latest software and firmware. These updates increase your system

performance, security, and stability.

The server Product Notes list the current server software release and firmware version that are

available. To determine which firmware version is installed on your server, use either the Oracle

ILOM web interface or the command-line interface (CLI).

■

For the web interface, click 

System Information 

→

 Summary

, and in the General

Information table, for System Firmware Version, view the property value.

Getting Firmware and Software

113

Summary of Contents for X8-8







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands