Oracle X8-8 Installation Manual Download

Page: 116 / 134

Getting Software from Software Delivery Cloud

Alternatively, type a full or partial product name (for example, Oracle Server X8-8) until a

match appears.

In the Release field, select a software release from the drop-down list.

Expand the list to see all available software releases.

Click

Search

to view a list of the patches for the software release.

The Patch Advanced Search Results screen appears, listing the patches for the software release.
See

“Software Releases” on page 114

for a description of the available software releases.

To select a patch for a software release, click the patch number next to the

software release version.

Use the Shift key to select more than one patch.
A pop-up action panel appears. The panel contains several action options, including the

ReadMe, Download, and Add to Plan options. For information about the Add to Plan option, on

the Add to Plan button, click the down arrow and select Why use a plan?.

To review the ReadMe file for this patch, click

ReadMe

10.

To download the patch for the software release, click

Download

, and in the File

Download dialog box, click the patch zip file name.

The patch for the software release downloads.

Getting Software from Software Delivery Cloud

You can obtain operating system and application software from the Oracle Software Delivery

Cloud. For information, see

https://edelivery.oracle.com/osdc/faces/Home.jspx

Download Software Using Oracle Software

Delivery Cloud

Before You Begin

You must have a valid user account.

Navigate to the Oracle Software Delivery Cloud home page:

https://edelivery.

oracle.com/osdc/faces/Home.jspx

116

Oracle Server X8-8 Installation Guide • June 2019

Summary of Contents for X8-8







































































































































Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands

Oracle X8-8, Installation Manual

Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands