Oracle VM Page 23 User Manual Download

Page: 23 / 112

Monitoring Oracle VM Agent

Oracle VM Agent

3-3

3.4 Stopping Oracle VM Agent

To stop Oracle VM Agent, enter

# service ovs-agent stop

Oracle VM Agent is stopped.

If you shut down or restart the Oracle VM Agent on an HA-enabled Oracle VM Server
on which guests are running you are prompted to:

■

Migrate or Power Off the guest(s) using Oracle VM Manager. When the guests
have been migrated or Powered Off, the Oracle VM Agent shuts down.

■

Shut down the guest(s) and shut down Oracle VM Agent.

■

Cancel the shutdown operation.

3.5 Monitoring Oracle VM Agent

To get information on the Oracle VM Agent daemon, enter

# service ovs-agent status

Information on the Oracle VM Agent daemon is displayed.

Note:

When Oracle VM Agent is stopped, Oracle VM Manager

cannot manage the Oracle VM Server or the guests running on it.

Summary of Contents for VM

















































































































Search results

Summary of Contents for VM

Reviews:

Related manuals for VM

Brands by name

Popular brands

Oracle VM, User Manual

Search results

Summary of Contents for VM

Reviews:

Related manuals for VM

Brands by name

Popular brands