| Oracle Talari T3010/T5000 | Hardware Guide
Rear Panel Configuration
The T3010 and T5000 rear panels contain the following user interface ports:
A VGA monitor port
Four USB 2.0 ports
One DB9 console port
One management port
One auxiliary port (limited to 100 Mbps full duplex)
A dual, hot-swappable AC power supply
T3010: One quad port Gigabit Ethernet bypass server adapter card
T5000: Two quad port Gigabit Ethernet bypass server adapter cards
Note: Running the T3010 or T5000 with a single power supply is not recommended for standard
operation. Connect power to both power supplies when installing these devices.
Figure 2: T5000 Rear Panel Configuration
Ethernet Ports
On the T3010, ports 1 and 2 form a bypass pair while ports 3 and 4 form a second bypass pair. On the
T5000, as illustrated in
Figure
2
,
the second quad port Gigabit Ethernet bypass server adapter card is
equipped with four additional ports. On the T5000’s second Ethernet adapter card, ports 5 and 6 form
a bypass pair while ports 7 and 8 form another bypass pair.
Port
Description
MGT
Management port (dedicated – out of band)
1
User defined; forms a Bypass pair with Port 2
2
User defined; forms a Bypass pair with Port 1
3
User defined; forms a Bypass pair with Port 4
4
User defined; forms a Bypass pair with Port 3
5
User defined; forms a Bypass pair with Port 6 (T5000 only)
6
User defined; forms a Bypass pair with Port 5 (T5000 only)
7
User defined; forms a Bypass pair with Port 8 (T5000 only)
8
User defined; forms a Bypass pair with Port 7 (T5000 only)
AUX
User defined; Used for MGT AUX. May be used as an untrusted port
Table 1: Ethernet Ports
