Installing the Switch
67
9. Give each retainer bolt a final torque of 2.0 ft-lb (0.27 kg-m) so that it is snug.
10. Install the fabric cards.
See
“Install the Fabric Cards or Fabric Card Fillers” on page 67
Related Information
■
“Remove the Midplane Stiffener” on page 70
■
“Inspect the Pins on the Front Side of the Midplane” on page 50
■
“Suggested Tools for Installation” on page 19
▼
Install the Fabric Cards or Fabric Card Fillers
Note –
Installing a fabric card or a fabric card filler is the same task.