Oracle StorageTek T10000D Manual Download | Manualshive

Page: 8 / 51

background image

Page 8 of 51

© Copyright 2017 Oracle Corporation

This document may be freely reproduced and distributed whole and intact including this Copyright notice.

2 S

TORAGE

T

EK

T10000D

T

APE

D

RIVE

2.1 Module Overview

Oracle’s StorageTek T10000D Tape Drive (Hardware Part #: 7042136/7314405;
Firmware  Version:  RB411111)  blends  the  highest  capacity,  performance,
reliability,  and  data  security  to  support  demanding,  24/7  data  center  operations.
The    T10000D  delivers    fast  write  speeds  (252  MB

2

/sec

3

) to a native 8.5 TB of

magnetic tape storage; making it ideal for data center operations with growing
data volume. The T10000D provides data protection with built-in AES

4

hardware

encryption  and  multiple  FIPS  140-2  Approved  modes  of  operation.  Customers
can be assured that  their data will  always  be secure,  in  any  of  these  FIPS 140-2
Approved modes.  The T10000D encrypting tape drive (ETD) operates with data
encryption services:



permanently enabled



temporarily enabled



temporarily disabled

Each  encryption  mode  provides  FIPS  140-2  Approved  security  services  and
functionality to ETD operators.  For added flexibility, a mixed mode of operation
supporting both FIPS 140-2 Approved and non-FIPS 140-2 Approved operations
is  also  available.  This  mode  of  operation  provides  a  non  FIPS-140-2  Approved
method  for  encrypting  the  tape  cartridge  contents  for  customers  who  do  not
require FIPS 140 protected content.

The StorageTek T10000D Tape Drive is featured in Figure 1 below.

2

MB – Megabytes

3

sec – Second

4

AES – Advanced Encryption Standard

«
...
6
7
8
9
10
...
»

Summary of Contents for StorageTek T10000D




















































Reviews:

No comments

Related manuals for StorageTek T10000D

Starck Mobile USB 3.0

Brand: LaCie Pages: 2

Brand: LaCie Pages: 2

Rugged Thunderbolt

Brand: LaCie Pages: 4

Rugged All-Terrain

Brand: LaCie Pages: 37

LaCinema Classic HD

Brand: LaCie Pages: 81

Brand: LaCie Pages: 4

Brand: Gearwrench Pages: 9

Brand: IBM Pages: 66

Brand: Hamlet Pages: 10

Brand: Seagate Pages: 40

Brand: IAC INDUSTRIES Pages: 8

Brand: Lifetime Pages: 52

12big Rack Spare

Brand: LaCie Pages: 4

BARRACUDA ST1000DM014

Brand: Seagate Pages: 29

Option GlobeTrotter

Brand: ORANGE Pages: 34

Tackle Caddy Console

Brand: RAILBLAZA Pages: 2

Brand: LaCie Pages: 26

PREMIUM STP7736

Brand: Supatool Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands