manualshive.com logo in svg

Oracle StorageTek T10000D, Manual, Page: 48 / 51

Share
Download
Oracle StorageTek T10000D Manual Download Page 48

 

 

  

Page 48 of 51 

 

              

© Copyright 2017 Oracle Corporation 

 

                              This document may be freely reproduced and distributed whole and intact including this Copyright notice.  

 

After  pressing  the  “Commit”  button,  the  ETD  will  reboot  to  normal  operation.  
From this point forward, the module will be operating in the Encryption Disabled 
Approved Mode. 
 

3.2.4 

 

Switching To Encryption Enabled Approved Mode 

The  CO  can  place  the  module  into  the  Encryption  Enabled  Mode  from  the 
Encryption  Disabled  Mode.    The  CO  shall  perform  the  following  steps  to  place 
the module into the Encryption Enabled Mode: 

1.

 

Using the “Drive Operations” menu on VOP, place the drive offline 

2.

 

Navigate  to  the  “Encrypt”  tab  in  the  “Drive  Data”  window  (Configure 

 

Drive Data) 

3.

 

Set the “Use OKM or DPKM” field to “OKM” 

4.

 

Set the “Permanently encrypting” field to “No” 

5.

 

Enter a valid Agent ID, Pass Phrase, and OKM IP Address 

6.

 

Press the “Commit” button 

 
After  pressing  the  “Commit”  button,  the  ETD  will  reboot  to  normal  operation.  
From this point forward, the module will be operating in the Encryption Enabled 
Approved Mode. 
 

3.2.5  Switching To Permanent Encryption Approved Mode 

The  CO  can  place  the  module  into  the  Permanent  Encryption  Mode  from  the 
Encryption  Disabled  Mode  or  the  Encryption  Enabled  Mode.    The  CO  shall 
perform  the  following  steps  to  place  the  module  into  the  Permanent  Encryption 
Mode: 

1.

 

Using the “Drive Operations” menu on VOP, reset the ETD

56

 

2.

 

Using “Drive Operations” menu on VOP, place the drive offline 

3.

 

Navigate  to  the  “Encrypt”  tab  in  the  “Drive  Data”  window  (Configure 

 

Drive Data) 

4.

 

Set the “Use OKM or DPKM” field to “OKM” 

5.

 

Set the “Permanently encrypting” field to “Yes” 

6.

 

Enter a valid Agent ID, Pass Phrase, and OKM IP Address 

7.

 

Press the “Commit” button 

 
After  pressing  the  “Commit”  button,  the  ETD  will  reboot  to  normal  operation.  
From  this  point  forward,  the  module  will  be  operating  in  the  Permanent 
Encryption  Approved  Mode.    Once  operating  in  this  mode,  the  module  will  be 
unable to operate in any of the other . 
 

                                                 

56

 This step is not needed if the drive is currently operating in the Encryption Disabled Mode 

Summary of Contents for StorageTek T10000D




















































Reviews:

No comments