Oracle StorageTek 8 Gb FC PCIe HBA Installation Manual Download

Page: 30 / 40

To Install or Update the

qlc

HBA Driver From a Patch

StorageTek 8 Gb FC PCIe HBA From QLogic Installation Guide • March 2015

To Install or Update the

qlc

HBA Driver From a Patch

Log in as the root user.

Navigate to the directory that contains the patch.

Add the latest patch by using the

patchadd

command.

patchadd

patch-number

Diagnostic Support for the Oracle Solaris OS

Diagnostic support for the HBA is included in the Oracle VTS software. The Oracle VTS
software is available for download at:

http://support.oracle.com/

For information about the Oracle VTS software, see the Oracle VTS documentation at:

http://

docs.oracle.com/cd/E19719-01/index.html

The

qlctest

utility, which is provided as part of the Oracle VTS software, supports the

following functions:

■

Connectivity verification

■

Firmware version and checksum testing

■

Self-testing

■

Loopback tests

■

External

■

Internal, single-bit

■

Internal, 10-bit

■

Mailbox

Installing Software for the Red Hat/SUSE Linux OS

This section describes how to download and install the fibre channel drivers required by the

HBA. It also describes how to install diagnostic support software for the HBA. This section

contains the following topics:

■

“Downloading the Red Hat/SUSE Linux Drivers” on page 31

■

“Installing the Red Hat/SUSE Linux Drivers” on page 31

■

“Diagnostic Support for the Red Hat/SUSE OS” on page 34

Summary of Contents for StorageTek 8 Gb FC PCIe HBA









































Search results

Summary of Contents for StorageTek 8 Gb FC PCIe HBA

Reviews:

Related manuals for StorageTek 8 Gb FC PCIe HBA

Brands by name

Popular brands

Oracle StorageTek 8 Gb FC PCIe HBA, Installation Manual

Search results

Summary of Contents for StorageTek 8 Gb FC PCIe HBA

Reviews:

Related manuals for StorageTek 8 Gb FC PCIe HBA

Brands by name

Popular brands