Testing the Installation
Chapter 2 • Hardware Installation and Removal
21
Yellow LED
Green LED
Amber LED
State
Flash
Off
Flash
Beacon
†
Flash sequence is yellow LED > green LED > amber LED, then back to yellow LED.
Testing the Installation
This section contains the following topics:
■
“To Verify Proper Installation (Oracle SPARC)” on page 21
■
“To Verify Attached Storage (Oracle SPARC)” on page 24
To Verify Proper Installation (Oracle SPARC)
1.
Use the
show-devs
command at the
ok
prompt to list the installed devices.
The HBA can be identified in the output by looking for the
SUNW,qlc@
n
and
SUNW,qlc@
n
,1
node names, where
n
is usually a single-digit number from 0 to 9. In this example, there is a
dual port HBA installed.
{0} ok
show-devs
/ebus@c0
/pci-performance-counters@0
/pci@0
/niu@80
/cpu@e
/cpu@d
/cpu@c
/cpu@b
/cpu@a
/cpu@9
/cpu@8
/cpu@7
/cpu@6
/cpu@5
/cpu@4
/cpu@3
/cpu@2
/cpu@1
/cpu@0
/virtual-devices@100
/virtual-memory
/memory@m0,8000000
/aliases
/options
/openprom
/chosen
