manualshive.com logo in svg

Oracle SPARC T7-2, Installation Manual

Share
Download
Oracle SPARC T7-2 Installation Manual Download Page 9

Understanding the Server

These topics list the installation tasks, provide an overview of the server, and highlight the key

components.

■

“Installation Task Overview” on page 9

■

“Server Overview” on page 10

■

“Front Panel Components (Installation)” on page 12

■

“Rear Panel Components (Installation)” on page 13

Related Information

■

“Installing the Server” on page 23

■

“Connecting the Server Cables” on page 41

■

“Powering On the Server for the First Time” on page 53

Installation Task Overview

Steps Description

Links

1.

Review the SPARC 

T7-2 Server Product Notes

 for any late-

breaking news about the server.

SPARC T7-2 Server Product Notes

2.

Review the server features, specifications, and site requirements.

“Server Overview” on page 10

“Confirming Specifications” on page 15

3.

Confirm that you received all of the items you ordered.

“Shipping Kit” on page 19

4.

Learn the server features, controls, and LEDs required for

installation.

“Front Panel Components (Installation)” on page 12

“Rear Panel Components (Installation)” on page 13

5.

Take safety and ESD precautions and assemble the required

tools.

“Handling Precautions” on page 21

“ESD Precautions” on page 21

“Tools Needed for Installation” on page 22

6.

Install any optional components into the server.

“Optional Components” on page 23

7.

Install the server into a rack.

“Installing the Server” on page 23

Understanding the Server

9

Summary of Contents for SPARC T7-2















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands