Oracle SPARC T7-1, Service Manual

Page: 43 / 190

Tools Needed For Service
Note -
An antistatic wrist strap is no longer included in the accessory kit for this server.
However, antistatic wrist straps are still included with options.
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Prevent ESD Damage” on page 50
■
“Tools Needed For Service” on page 43
Tools Needed For Service
You need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
No. 1 flat-blade screwdriver (battery removal)
■
T6 Torx screwdriver
■
T10 Torx screwdriver
Related Information
■
“Safety Information” on page 41
■
“Prevent ESD Damage” on page 50
Fillers
A filler is an empty metal or plastic enclosure that is installed at the factory or in the field into a
server component slot that does not contain a functioning component. The fillers ensure proper
airflow through the system. Depending on the component configuration, the server can include
the following types of fillers:
Preparing for Service 43