Oracle Netra SPARC T4-1B Service Manual Download Page 113

Page: 113 / 142

Servicing the ID PROM

103

3. Align the ID PROM notched end with the notched end on the motherboard

socket and press in place (panel 2).

4. Return the server module to operation.

See

“Returning the Server Module to Operation” on page 117

5. Verify the ID PROM.

See

“Verify the ID PROM” on page 103

Related Information

■

“Remove the ID PROM” on page 101

■

“Verify the ID PROM” on page 103

▼

Verify the ID PROM

The host MAC address and the host ID values are stored in the ID PROM. This task
describes ways to display these values.

1. Display the MAC address that is stored in the ID PROM.

Example using the Oracle ILOM

show

command:

show /HOST macaddress

/HOST

Properties:

macaddress = 00:21:28:34:29:9c

Summary of Contents for Netra SPARC T4-1B















































































































































Search results

Summary of Contents for Netra SPARC T4-1B

Reviews:

Related manuals for Netra SPARC T4-1B

Brands by name

Popular brands

Oracle Netra SPARC T4-1B, Service Manual

Search results

Summary of Contents for Netra SPARC T4-1B

Reviews:

Related manuals for Netra SPARC T4-1B

Brands by name

Popular brands