Oracle Netra SPARC T4-1B Service Manual Download Page 66

Page: 66 / 142

Netra SPARC T4-1B Server Module Service Manual • June 2012

Related Information

■

“Locate the Server Module” on page 56

■

“Find the Modular System Chassis Serial Number” on page 54

▼

Locate the Server Module

To identify a specific server module from others in the modular system, perform the
following steps.

1. Log in to Oracle ILOM on the server module you plan to locate.

2. Type.

The Locator LED on the server module blinks.

3. Identify the server module with a blinking white LED.

4. Once you locate the server module, press the Locator LED to turn it off.

Note –

Alternatively, you can turn off the Locator LED by typing the Oracle ILOM

set /SYS/LOCATE value=off

command.

Related Information

■

“Remove the Server Module From the Modular System” on page 61

Preparing the Server Module for
Removal

There are several ways to shut down the server module before you remove it from
the chassis.

set /SYS/LOCATE value=fast_blink

Summary of Contents for Netra SPARC T4-1B















































































































































Search results

Summary of Contents for Netra SPARC T4-1B

Reviews:

Related manuals for Netra SPARC T4-1B

Brands by name

Popular brands

Oracle Netra SPARC T4-1B, Service Manual

Search results

Summary of Contents for Netra SPARC T4-1B

Reviews:

Related manuals for Netra SPARC T4-1B

Brands by name

Popular brands