Oracle Netra SPARC S7-2, Service Manual

Page: 169 / 258

Servicing PCIe Cards
PCIe cards provide additional I/O and other functionality. The PCIe cards install into the card
slots located across the rear of the server. See “Component Locations (Motherboard, Memory,
and PCIe Cards)” on page 16 . Additionally, there is an internal HBA PCIe card. See “Servicing
the Internal HBA PCIe Card” on page 179 .
Caution -
Ensure that all power is removed from the server before removing or installing PCIe
cards, or damage to the PCIe cards might occur. You must disconnect all power cables from the
system before performing these procedures.
Caution - Disconnect any external cabling to a PCIe card prior to removing the card.
Description Links
Replace a faulty PCIe card. “Detecting and Managing Faults” on page 25
“PCIe Card Configurations” on page 170
“Locate a Faulty PCIe Card” on page 172
“Remove a PCIe Card” on page 174
“Install a PCIe Card” on page 176
“Verify a PCIe Card” on page 177
Remove a PCIe card as part of another
component's service operation.
“Remove a PCIe Card” on page 174
Install a PCIe card as part of another
component's service operation.
“Install a PCIe Card” on page 176
Identify I/O connections. “I/O Root Complex Connections” on page 171
Determine device NAC names. “PCIe Device NAC Names” on page 172
Add PCIe cards. “PCIe Card Configurations” on page 170
“Install a PCIe Card” on page 176
“Verify a PCIe Card” on page 177
Servicing PCIe Cards 169