Oracle MICROS M31, Setup Manual

Page: 13 / 57

Chapter 4
Installation and Usage
4-5
Charging Batteries with the Quad Battery
Charging Cradle
1.
Insert the battery into the Quad Battery Charging Cradle.
2.
Gently slide the battery until it reaches the bottom of the charger.
3.
Charging starts as soon as the battery is completely inserted.
4.
After charging, remove the battery from the Quad Battery Charging Cradle.
Table 4-1 – Quad Battery Charging Cradle Status Indicators
LED Charge Status Charge Time
Red LED On Charging
2.5 hours
Green LED Blinking Over 80% Charged
Green LED On Fully Charged
Red LED Blinking Error Replace
CAUTION:
•
If the red LED on the charger blinks, reseat the battery in the charger.
•
If the red LED continues to blink despite several attempts (4 ~ 5 times) to
reseat the battery, contact Oracle.
•
Charging time may vary depending on the type of the charger or the
ambient temperature.