Oracle Exalogic Elastic Cloud, Owner'S Manual

Page: 154 / 342

10.128.21.186 leaf:1" enhanced port 0 lid 14 lmc 0
. . .
Switch : 0x0010e00b6d80c0a0 ports 36 "SUN IB QDR GW switch el01sw-ib03
10.128.21.187 leaf:2" enhanced port 0 lid 15 lmc 0
The lid and port data from the previous command output matches the following
switches:
• switch lid 14, base lid 72 matches
el01sw-ib02
• switch lid 15, base lid 71 matches
el01sw-ib03
The following is an extract of the third and last command:
root@el01cn16:~# ibstat
. . .
Port 1:
. . .
Base lid: 71
. . .
Port GUID: 0x0021280001eff369
Link layer: IB
Port 2:
. . .
Base lid: 72
. . .
Port GUID: 0x0021280001eff36a
Link layer: IB
With this information you can see that
0x0021280001eff369
is the port GUID
for
net4
and
0x0021280001eff36a
is the port GUID for
net5
(see 6 ). Now you
can determine the following mappings:
•
port1 -> net4 -> el01sw-ib03
•
port2 -> net5 -> el01sw-ib02
8.
Run the following commands to create the EoIB datalink over
net4
and display
the results of the procedure:
root@el01cn16:~# dladm create-eoib -l net4 -g el01sw-ib03 -c 0A-ETH-1 eoib0
root@el01cn16:~# dladm show-eoib
LINK GWNAME GWPORT GWID FLAGS SPEED MACADDRESS OVER
eoib0 el01sw-ib03 0a-eth-1 506 aH---- 10000 0:0:0:0:0:0 net4
9.
Open another terminal and log in as
root
to the switch
net4
is connected to
(
el01sw-ib03
for this example).
Run the following commands to create a VNIC with no VLAN tag and display the
results of the procedure. The following is an example of the commands' output:
[root@el01sw-ib03 ~]# createvnic 0A-ETH-1 -guid 0021280001EFF369 -mac
80:C0:A0:09:16:01
vNIC created
[root@el01sw-ib03 ~]# showvnics |grep cn16
105 WAIT-IOA N 0021280001EFF369 el01cn16 EL-C 192.168.10.16 0000
80:C0:A0:09:16:01 NO 0xffff 0A-ETH-1
Set Up Ethernet Over InfiniBand (EoIB) on Oracle Solaris
10-14 Oracle Exalogic Elastic Cloud Machine Owner's Guide