Oracle Exalogic Elastic Cloud, Owner'S Manual

Page: 114 / 342

Tip:
Refer to the Cluster documentation in the Oracle ZFS Storage Appliance
Administration Guide located on
http://docs.oracle.com/cd/
E27998_01/html/E48433/index.html
for more information.
Complete the following steps:
1.
Verify that the storage appliance is powered up and on the network.
2.
Connect an Ethernet cable from your network to the
NET0
port on the back panel
of the controller (storage server head).
3.
Open a terminal window and use an SSH client to connect to the administrative
console of the storage appliance (
ssh root@192.168.128.256
). When
prompted, enter the administrative password for the storage appliance that you
set when running Oracle
Exalogic Configuration Utility
to configure the
Exalogic machine.
a.
After login, at the command prompt, type
start /SP/console
.
b.
Type
y
to confirm that you want to start the console.
c.
Press any key to begin configuring the appliance. The shell interface
configuration screen appears. NET-0 at the top of the screen should be
underlined.
d.
Verify the information on the screen, or enter values that do not appear.
e.
Apply the values by pressing
ESC-1
or the
F1
key or by pressing
Enter
after
confirming the password. The final shell configuration screen appears,
confirming that your appliance is ready for further configuration using the
browser user interface (BUI).
4.
Configure the remaining system parameters through a browser running on any
client on the same network as the initial interface. The management software is
designed to be fully featured and functional on the following supported web
browsers: Firefox 2.x and 3.x, Internet Explorer 7, Internet Explorer 8, Safari 3.1 or
later, and WebKit 525.13 or later.
5.
Direct your browser to the storage system using either the IP address or host
name you assigned to the NET0 port as follows:
https://ipaddress:215
or
https://hostname:215
The login screen appears.
6.
Type
root
into the Username field and the administrative password that you
entered into the appliance shell kit interface and press the
Enter
key. The
Welcome screen appears.
7.
To begin configuring the system, click Start on the Welcome screen.You are
guided through the Initial Configuration of the remaining network interfaces,
DNS, time settings, directory service, and storage.
Getting Started
8-2 Oracle Exalogic Elastic Cloud Machine Owner's Guide