Oracle Exadata Storage Server X7-2 EF, Service Manual

Page: 208 / 284

Verify BIOS Factory Default Settings
■
“Configure TPM Support” on page 210
■
“Configure UEFI Driver Settings” on page 212
■
“Configure I/O Resource Allocation” on page 215
■
“Configure UEFI Secure Boot” on page 218
■
“Configure Trusted Execution Technology” on page 227
■
“Exit BIOS Setup Utility” on page 229
Verify BIOS Factory Default Settings
In the BIOS Setup Utility, you return the BIOS settings to the optimal factory default values, as
well as view and edit settings as needed. Any changes that you make in the BIOS Setup Utility
(using the F2 key) persist until the next time you change the settings.
Before you begin, ensure that a console connection is established to the server.
1. Reset or power on the server.
For example, to reset the server:
■
From the local server , press the On/Standby button on the front panel of the server to
power off the server, and press the On/Standby button again to power on the server.
■
From the Oracle ILOM web interface
, click Host Management → Power Control and
select Reset from the Select Action list. Click Save, and click OK.
■
From the Oracle ILOM CLI , type
reset /System
2.
After the server resets and begins the initialization process, when prompted,
press the F2 key to access the BIOS Setup Utility.
3.
To ensure that the factory defaults are set, do the following:
a.
Press the F9 key to automatically load the optimal factory default settings.
b.
In response to the confirmation message to continue, highlight OK, and
press Enter.
4.
On the BIOS Setup Utility screen, press the F10 key to save the changes and exit
the BIOS Setup Utility.
Related Information
■
“Access BIOS Setup Utility Menus” on page 203
208 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018