manualshive.com logo in svg

Oracle Exadata Storage Server X7-2 EF, Service Manual

Share
Download
Oracle Exadata Storage Server X7-2 EF Service Manual Download Page 150

Install the Front LED Indicator Module

Note - 

On the HC server, you might need to disconnect the SAS cable connections from the

Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card in PCIe slot 11 to access the LED

indicator module motherboard cable connection. See 

“Servicing SAS Cables” on page 167

.

3.

Return the server to operation.

a.   

Install the server top cover.

See 

“Install the Server Top Cover” on page 189

.

b.   

Return the server to the normal rack position.

See 

“Return the Server to the Normal Rack Position” on page 191

.

c.   

Reconnect the power cords to the power supplies, and power on the server.

See 

“Reconnect Power and Data Cables” on page 192

 and 

“Power On the

Server” on page 193

.

d.   

Verify that the power supply AC OK LED is lit.

150

Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018

Summary of Contents for Exadata Storage Server X7-2 EF





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands