HOW TO…
…pack and unpack your Delphi
-
remove the inner box by lifting it straight up and out. Open the flaps on both ends and
slide our the styrofoam packaging.
-
Remove the traps binding the packaging together.
-
Select a clean lat work surface, like a table or counter top, for setting up the turntable.
-
Lift the styrofoam cover straight up so as to protect the corner reinforcement.
-
Remove the dust cover from the upper section of packaging and set it aside for a later
installation.
-
Remove the upper section of packaging leaving all the accessories in place and set it near
by.
-
Remove the acrylic base plate from the lower section of the packaging and place it on your
work table.
-
Note 1: Lift the acrylic base straight up so as not to damage the platter’s spindle protruding
through.
-
Note 2: All the accessories are positioned strategically in the packaging to prevent them
from coming loose and possibly damaging the turntable during shipping. When shipping
the turntable it is important to place each item in its right place. To that effect,
simple diagrams have been affixed to the inside end covers of the inner box.
-
Note 3: Your Oracle’s packaging has been designed to protect it from the abusive handling
normally encountered during shipping. Save all packing materials for use in any future
shipping.
Delphi MK III
Owner’s manual
Summary of Contents for DELPHI MK III
Page 18: ......
