Specifications
18
Oracle 1.6TB NVMe SSD User Guide • July 2015
Specification
Value
■ 3.3Vaux for SMBUS
Enhanced power-loss data protection
Active/Idle: Up to 25W/4W (typical)
Power consumption
■ Active Write - Average = 22W
■ Active Read - Average = 10W
■ Idle = 4W
The Oracle 1.6TB NVMe SSD receives electrical power from the PCI E12 VDC and
+3.3 VDC power rails as shown in the following table:
Specification
12 V Operating Characteristics
3.3 Vaux Operating Characteristics
Operating voltage range
12 V (+10%/-20%)
3.3 V (+-9%)
Rise time (Max/Min)
50ms/1ms
50ms/1ms
Fall time (Max/Min)
5s/1ms
5s/1ms
Noise level
1000 mV pp at 10Hz – 100KHz
100 mV pp at 100KHz – 20 MHz
300 mV pp at 10Hz – 100KHz
50 mV pp at 100KHz – 20 MHz
Min off time
200 ms
200 ms
Inrush current (typical peak)
1.5 A
1.5 A
Max average current
2.45 A
1 mA
Related Information
■
“Product Overview”
■
“NVMe Drive Service Overview” on page 33
Reliability Specifications
The Oracle 1.6TB NVMe SSD reliability specifications are shown in the following table:
Specification
Value
Uncorrectable Bit Error
Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified number of bits read.
In the unlikely event of a non-recoverable read error, the storage drive will report it as a
read failure to the host; the sector in error is considered corrupt and is not returned to the
host.
< 1 sector per 10
17
bits read
Mean Time Between
Failures (MTBF)
2 million hours
Mean Time Between Failures is estimated based on Telcordia methodology and
demonstrated through Reliability Demonstration Test (RDT).
