Simultaneous Connection of an External Digital
to Analogue Converter
• Plug your digital/optical interconnect to the rear of the player and connect it
to your stand alone D/A converter
• Connect the
Analogue outputs
to an «
Auxiliary
» input at the rear of your
pre-amplifier
• Balance the volume between the two D/A converters through the external
converter volume control... should this facility be available
• Switch from «
CD
» to «
Auxiliary
» so as to compare the two options
It is possible to simultaneously use the BNC (75 Ohms) Digital output to compare
the players internal Digital/Analogue converter, with that of an external (stand
alone) D/A converter
15 pin DC Input
BNC
Digital Output
NOTE
It is not necessary to use digital output unless connecting
to a separate stand alone DAC.
NOTE
Connection Procedure
We strongly suggest the use of the best possible Analogue
Interconnect cables available, your dealer will help you make
the right choice.
WARNING
Lower the volume of the pre-amplifier as there could be a
major difference in gain, this could cause damage to your
loudspeakers.
Analogue RCA
Outputs
7
• Connect your pair of RCA terminated Analogue Interconnect cables from the
rear of the player to your pre-amplifier Digital input ( CD input )
Connection to the Pre-Amplifier, CD input
Summary of Contents for CD turntable
Page 1: ......
