Oracle Audio CD turntable, Owner'S Manual

Page: 14 / 20

For your convenience and to increase ease
of use, your new Oracle CD Player/Drive is
supplied with an Infra-red remote control
facility. To enable you to reap the benefit of
this facility please spend a few minutes read-
ing these simple instructions.
Beginning at the top, or front of the handset
the various buttons (function keys) will be
described on the left of the page. What the
button does and how to do it is described on
the right of the page.
Remote Control Operation
FUNCTION KEY
WHAT IS DOES & HOW TO DO IT
•Red Button•
( STBY )
This is the Standby button and this allows the display
screen to be turned off as if the unit was out of service.
Whilst the player looks as if it is switched off, the opti-
mum operating temperature is maintained.
PRESS
the
STBY
button once and the display goes out.
PRESS
the
STBY
button again and this will have a similar effect as
pressing the « Disc Reset » on the display keyboard func-
tion selector to initialize the selected disc. If the unit
was in a Standby mode after using the
STBY
button,
it must be pressed again so the player can resume the
operational mode.
•Numeric Buttons•
( 1 – 0 )
These buttons relate to the track numbers on your CD,
and run from 1 through 9, the 0 button becomes 10 by
pressing first 1 then 0. The player is able to play, merely
by pressing a combination of two buttons any track on a
CD that may contain anything up to 99 tracks.
12