Opvimus ME-200C, Operating Instructions Manual

Page: 13 / 33

MD-30C version 3.2.000
12
Microphone desk and
voice alarm fireman's panel
ME-200C
9. OPERATIONS IN EMERGENCY MODE
9.1. Entering the Emergency Mode
Insert the key into the lock and turn 90° clockwise. The
LOGGED LED should light up.
9.2. Activating a WARNING message
1. Press the WARNING button (the system must be in
Emergency Mode). The WARNING button indicator light
illuminates and the warning message begins to play.
2. Press the RESET button to stop the message. The system
exits the Emergency Mode.
If an EVACUATION message is played while the WARNING
message is playing, the WARNING message will stop.
If a live voice message is sent while the WARNING message is
playing, the WARNING message stops playing while the live
voice announcement is being broadcast. When the live voice
message ends, the WARNING message will automatically
resume playing.
9.3. Activating an EVACUATION message
1. Press the EVACUATION button (the system must be in
emergency mode). The EVACUATION button indicator
light illuminates and the evacuation message begins to
play.
2. Press the RESET button to stop the message. The system
exits the Emergency Mode.
The EVACUATION message takes priority over the WARNING
message: the activation of the evacuation message stops the
WARNING message.
If a live voice message is sent while the EVACUATION
message is playing, the EVACUATION message stops playing
while the live voice announcement is being broadcast. When
the live voice message ends, the EVACUATION message will
automatically resume playing.
9.4. Sending a live voice message in
Emergency Mode
1. With the microphone desk in emergency mode, press and
hold the GONG+TALK (or TALK ) button.
2. You can begin speaking when the TALK indicator light
illuminates.
3. To finish the broadcast, release the button.
Live voice announcements take priority over an EVACUATION
message and in turn, an EVACUATION message takes priority
over a WARNING message.
9.5. Repeat function in Emergency Mode
With the microphone desk in emergency mode, select the
REPEAT key. The TALK/REPEAT indicator light up while the
message is being repeated.
You can stop a repeat message that is being played by press-
ing the REPEAT key again
9.6. Exiting the Emergency Mode
Press the RESET key. The EMERGENCY button light goes out
to indicate that the desktop paging system is no longer in
Emergency Mode
All the emergency messages (live messages as well as pre-recorded WARNING and EVACUATION messages) will be broadcast to
the ASSOCIATED GROUP. The ASSOCIATED GROUP must have been previously configured via the Call Point software.
The WARNING and EVACUATION messages are assigned and configured via the
Call Point
software
The WARNING, EVACUATION and RESET pushbuttons are not operative until emergency mode is entered using the key.
In EMERGENCY MODE, live voice announcements take priority over an EVACUATION message and in turn, an EVACUATION
message takes priority over a WARNING message.
After 60 seconds without any operation from the desk (this time can be modified by the Call Point software), the LOGGED LED
goes off and the emergency buttons of the microphone desk are no longer operative, being necessary to reactivate the key
switch to operate again with the microphone desk.