8
Health & Safety precautions:
• Before operating the equipment please read the Health & Safety precautions,
manufacturer recommendations and the operation manual.
• The operation manual should be easily available at any time for the operator.
• The equipment should be installed on sturdy and level surface near a 220-240 V,
50 Hz socket.
- should be protected against dust and moisture
- must not be placed near the heating or ventilation units.
- must not be used in vicinity of inflammable liquids or gases
• The power supply cable should be protected against damage and must not be used
to pull the equipment or to remove the plug from the socket.
• The equipment must be kept away and out of from reach of children.
Danger!
The equipment contains rotary elements. Ensure long hair, loose jewellery,
ties and other loose pieces of clothing are keep away they can be get
entangled in the rolls.
• The equipment must not be used for any other purposes than those indicated in the
instruction
manual.
• It is necessary to check and supervise if the equipment is operated correctly.
• In case of any malfunctions, you must contact the dealer or service team.
• The equipment must not be located outside and should be operated in a room
temperature higher than +8 °C.
• Before removing any covers from the equipment, remove the power plug from
a mains socket.
• Using inappropriate lubricants causes a fire hazard.
• Any repairs must be carry out only by authorised staff.
• The equipment must be operated according to general Health & Safety rules.
• Do not leave the equipment in operation without an operator.
• After work it is necessary to turn the equipment off by the switch on unit after
the cooling down procedure, next remove the plug from a socket
User’s guide OPUS everLAM 330LCD
