CamRecord CR-S3500
Ref. 1900-SU-02-C
Page 20
Trigger Input (TI)
(9) The image sequence can be triggered (the recording will be stopped) by
an external Switch or TTL signal. To use the trigger input, please refer to
the TimeViewer software package.
Synchronization Input (SI)
(9) The synchronization input can be used to synchronize the exposure time
of several cameras. To synchronize the cameras, a TTL level has to be
applied. Please refer to the TimeViewer software package to activate the
synchronization input.
LED A / LED B
(10)
Color code
Led color
O
Orange
G
Green
R
Red
State
Timing
Off
0% On
SO = Solid
100% On
SF = Slow Flash
0.5Hz (1s On, 1s Off)
FF = Fast Flash
5Hz (100ms On, 100mn Off)
Camera State
Led State
A
B
No power
Off
Off
1) System Booting:
Camera booting
R-SO
R-SO
Booting finished (FF for 1s)
R-FF
R-FF
2) Camera running
No image, live stopped
G-SO
Live mode (internal sync)
G-SF
Live mode (external sync and signal ok)
G-SF
Live mode (external sync but no sync signal)
R-SF
Waiting for trigger
O-FF
Triggered, recording sequence to DDR (internal sync)
G-FF
