USB Server Gigabit
– Quick Start Guide
ACPIUSBSGB-QSG-E2017-07-A
4/8
8. The standard setting of the USB server is DHCP. On a direct connection to a PC set a static IP address to
the device. Take care that the network part of the address is identical to the network part of the IP
address of the connected PC (therefore:
192.168.0
). The host part must have a different digit than the
user-defined IP address of your PC (for example: 192.168.0.
2
):
9. Now press
Next
and then
Finish
. The network connection between PC and USB server will be
established and you can perform the USB Redirector as described previously. Close the
WuTility
software.
Starting the USB Redirector
10. Start the
USB Redirector
. The local network will be automatically scanned for available USB servers (if
not, refresh the current view with
File/ New
).
If several USB servers are in your network you can identify your own by the number you find in the
overview of
Redirector
(under
Description
) as well as on the serial number label of your device(e.g.: USB
server-
07055e
).
