USB Server Gigabit
– Quick Start Guide
ACPIUSBSGB-QSG-E2017-07-A
3/8
If you want to switch between a user-defined IP address and
a DHCP server, the following alternative configuration is
recommended: Under the
General
tab choose
Obtain an
IP address automatically
, and on the
Alternate
Configuration
tab, click
User configured
and enter a
user defined IP address:
Starting the program WuTility
6. To change the network settings of the USB server start the
WuTility
program:
Independent on the current network settings of the USB server the device is displayed now (if not, refresh
the current view with
Scan
).
If there is any problem in the
WuTility
software with the detection of connected USB server,
check the following setting:
1. Go to
Options/Inventorying method
and choose
Global broadcast
.
7. Mark the USB server and then press
IP Address
:
