USB Server Gigabit
– Quick Start Guide
ACPIUSBSGB-QSG-E2017-07-A
2/8
1. Direct Connection USB Server Gigabit [ACPIUSBSGB] (Point-to-Point-Network)
Installation
On a direct connection to a PC both, the USB server as well as the PC must use a fixed IP address. There is no
DHCP server available. Accomplish the following settings on your PC once (depending on the operating system
the procedure can differ from the here shown
– the following description refers to a Windows 7 system).
1. Go to
Control Panel
; open
Network and Sharing Center
.
2. Enter
Local Area Connection
– status screen
[1]
is shown and subsequently
Properties
.
3. Mark
Internet protocol Version 4 (TCP/IPv4)
[2]
and go to
Properties
again
.
[1]
[2]
[3]
4. In the register card
General
enable the checkbox
Use the following IP address
[3]
5. Now enter a user defined IP address for your PC, for example
192.168.0.1
.
