English 65
ADDITIONAL INFORMATION
Blurry double image
Make sure “Display Mode” is not 3D to avoid normal 2D image appear blurry double image.
Two images, side-by-side format
Set the “3D”
“3D Format” to “SBS”.
Other problems
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before
reconnecting power.
Remote control problems
If the remote control does not work
Check the operating angle of the remote control is pointed within ±15° (horizontally) or ±10° (vertically)
to the IR receiver on the projector.
Make sure there are not any obstructions between the remote control and the projector. Move to within
7 m (~22 ft) of the projector.
Try to operate the remote control by pointing it to the projected image.
Make sure battery is inserted correctly.
Replace battery if it is exhausted.
