English 13
INTRODUCTION
Pairing your Bluetooth remote control with the projector
Press the
and
buttons simultaneously for 2 seconds. The status LED on the Bluetooth remote control will
flash, indicating the device is in pairing mode.
Enter
2s
The pairing process will take approximately 20 seconds. If the pairing is successful, the status LED on the
Bluetooth remote control will turn solid blue. Otherwise, the status LED on the Bluetooth remote control will turn
solid red.
If the Bluetooth remote control is left idle for 10 minutes, it will automatically enter Sleep mode and the Bluetooth is
disconnected.
Note:
The actual remote control may vary depending on the region.
Some keys may have no function for models that do not support these features.
Before using the remote control for the first time, remove the transparent insulation tape. See page
18
for battery installation.
3
VO
LT
S
CR2032
