User Controls
Edge Mask
Choose “On” to mask off a few pixels on
each edge of the image to be displayed.
Use Edge Mask “On” if image source
happens to have encoding error near any
edge of the displayable image.
On
Activate the 12V OUT A output.
Off
Deactivate the 12V OUT A output.
4:3
Scale the image at a 4:3 aspect ratio.
Letter Box
Enable the viewing of the letterboxed
nonanamorphically enhanced movie at
full screen width. Part of the original
image will be lost if the image aspect ratio
is less than 2.35:1.
Re-Sync
Automatically synchronize the projector to
the input source.
16:9
Scale the image at a 16:9 aspect ratio.
Native
The input source will be displayed without
scaling.
VGA
Press “VGA” to choose source from VGA
connector.
HDMI 1
Press “HDMI 1” to choose source from
HDMI 1 connector.
HDMI 2
Press “HDMI 2” to choose source from
HDMI 2 connector.
HDMI 3
Press “HDMI 3” to choose source from
HDMI 3 connector.
YPbPr
Press “YPbPr” to choose Component
Video source.
S-Video
Press “S-Video” to choose S-video
source.
Video
Press “Video” to choose Composite Video
source.
Source
Press “Source” to choose RGB,
Component, S-Video, Composite Video,
and HDMI source.