Optoma HD28DSE, User Manual

Page: 27 / 73

English 27
UsInG THE PRoJECToR
main menu sub menu sub menu 2 sub menu 3 sub menu 4 Values
Options
Remote Settings
USER 3
[Default: Gamma] Color Settings
Color Temp.
Gamma
HDMI Link
Test Pattern
AV Mute
DARBEE
Exit
Advanced
Direct Power On
On
Off [Default]
Auto Power Off
(min.)
0-180 [Default: 20]
notee: One step is 5
minutes.
Sleep Timer (min.)
0-990 [Default: 0]
notee: One step is 30
minutes.
Always On [Default:
Unchecked]
notee: “Always On”
is a check box type
parameter.
Power Mode
(Standby)
Active
Eco. [Default]
Exit
Reset
Current [Default]
All
notee:
If the Signal setting is set to Automatic, the Phase, frequency items are grayed out. If the “Signal” ‡
setting is set to a specific input source, the phase, frequency items will appear for user to manually
tune and saved in settings.
The “LAMP RESET” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service
‡
mode. The Projection Hours in service mode will not be reset.
When you made the changes on the “IR Function”, “Projection”, or “Keypad Lock” function, a
‡
confirmation message will appear on the screen. Select “Yes” to save the settings.
Each display mode can be adjusted and saved the value. ‡
In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.
‡