background image

English

48

UsInG THE PRoJECToR

options HDmI link settings menu

oPTIons

HDmI link settings

HDMI Link

Exit

Off

Inclusive of TV

Power On Link

Power Off Link

Yes

Mutual

Off

Using HDmI link

When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control 

 

‡

them on same Power On or Power Off status using the HDMI Link control feature on the projector’s 

OSD.
This lets one device or multiple devices in a group Power On or Power Off via HDMI Link Feature.

 

‡

In a typical configuration, your DVD player may be connected to the projector through an amplifier or 

 

‡

home theater system.

HDmI link

Enable/Disable the HDMI Link function. The Inclusive TV, Power on Link, and Power off Link options will only 

available if the setting.

HDMI Link

Off

On

Inclusive of TV

If the setting is set to “Yes”, both TV and projector will be automatically turned off at the same time. To prevent both 

devices to be turned off at the same time, set the setting to “No”.

Inclusive of TV

No

Yes

Power on link

CEC power on command:

Mutual: Both projector and CEC device will be turned on simultaneously.

 

‡

PJ -> Device: The CEC device will be turned on only after the projector is switched on.

 

‡

Device -> PJ: The projector will be switched on only after the CEC device is turned on.

 

‡

Power On Link

Mutual

Press the 

 

‡

 into the next menu and then use the   or  to select “Mutual”, “PJ -> Device”, “Device 

-> PJ” item. 

Summary of Contents for HD28DSE










































































Reviews: