奇
菱
光電股份有限公司
Chi Lin Optronics Corp.
Doc. No
CS-72601
Version A3
Title
CHT-726 Level 1 Service Manual
Page
29 / 75
7. Pull out the failed lamp
8. The lamp module. Replace a good lamp module in
and secure screws on.
9. Place lamp door on, press all clips of the lamp
door into the top and the bottom cabinet and
secure 2 screws.
10. Electric screw driver torque set for 11 lbs.
8.1.1 Resetting Lamp Timer
Connect the power cord into AC socket of the projector and turn on the projector.
Press “Menu” on Projector Control Panel or Remote Control. Select “Option” on OSD, then select
“Lamp Timer Reset”, when enter to “Lamp Timer Reset”, select “Yes” to reset previous timing record.
Information & Warning:
To reset Lamp timer is only allowed when replacing the lamp. If you reset the
lamp timer and continue to use the same lamp, this may cause the lamp damaged and exploded.
