奇
菱
光電股份有限公司
Chi Lin Optronics Corp.
Doc. No
CS-72601
Version A3
Title
CHT-726 Level 1 Service Manual
Page
35 / 75
14. Reconnect the cables which connect to keypad
on top cabinet. And place the top cabinet on.
Note: The two wires should be pull backward to the
electronic parts. If the wires are left on the optical
engine, the keypad sensitivity will be affected.
15. Electric screw driver torque set for 6.6 lbs.
16. Test the projector. If the unit functions well, go
to step 11. If the LED flashs, disconnect the
wires from keypad and go back to step 6 on
page 30 and disassemble the projector to check
the connectors and fans.
17. Turn over the projector and secure 9 screws on
the bottom cabinet.
18. Electric screw driver torque set for 11 lbs.
19. Place lamp door on, press all clips of the lamp
door into the top and the bottom cabinet and
secure 2 screws.
20. Electric screw driver torque set for 11 lbs.
