奇
菱
光電股份有限公司
Chi Lin Optronics Corp.
Doc. No
CS-72601
Version A3
Title
CHT-726 Level 1 Service Manual
Page
63 / 75
35. Loosen 4 screws to take off the shielding from
the power module.
36. Electric screw driver torque set for 6.6 lbs.
37. Disconnect the cables from the ballast and
loosen 3 screws to take the ballast from the
electronic module.
38. Electric screw driver torque set for 11 lbs.
39. The ballast.
(If the ballast malfunction, replace the failed ballast
with a good one and go to step 34 on page 63)
The Rear IR Sensor
40. Loosen 4 screws to take the I/O board off.
41. Electric screw driver torque set for 11 lbs.
