E
nglish
13
Elevator Foot
Installation
The projector is equipped with an elevator foot to adjust the
image height.
To raise or lower the image :
1. Turn the projector over and locate the elevator foot. Press
the elevator button
n
to extend the foot so it may be
adjusted.
2. While holding down the elevator button, adjust the foot to
the desired height,
o
then release the button to lock the
elevator foot into position.
3. Use
p
to fine-tune tilt-adjustment
4. Lower the projector so it rests on its foot; adjust as
needed.
Adjusting the Projected Image
Adjusting the Image Height
3
2
Tilt-adjustment Foot
Elevator Foot
1
