manualshive.com logo in svg

Optoma EW615i, Service Manual, Page: 2 / 101

Share
Download
Optoma EW615i Service Manual Download Page 2

EX612/EX615/EW615i/EX612i/EX615i

EX615i Confidential

I

Preface

This manual is applied to EX612/EX615/EW615i/EX612i/EX615i projection system. The 

manual gives you a brief description of basic technical information to help in service and 

maintain the product.
Your customers will appreciate the quick response time when you immediately identify 

problems that occur with our products. We expect your customers will appreciate the 

service that you offer them.
This manual is for technicians and people who have an electronic background. Please 

send the product back to the distributor for repairing and do not attempt to do anything that 

is complex or is not mentioned in the troubleshooting.
 

Notice: The information found in this manual is subject to change without prior notice. Any                     

            subsequent changes made to the data herein will be incorporated in future edition.

 
EX612/EX615/EW615i/EX612i/EX615i Service Manual
Copyright Sep. 2011
All Rights Reserved
Manual Version 7.0

Summary of Contents for EW615i






































































































Reviews:

No comments