Optoma EH460, User Manual

Page: 23 / 75

English 23
UseR ConTRols
Using the Remote Control
Video/6 Press “Video” to choose Composite video source.
User 1/7 Refer to the “User1 / User2 / User3” on page 41
User 2/8 Refer to the “User1 / User2 / User3” on page 41
User 3/9 Refer to the “User1 / User2 / User3” on page 41
/0
Brightness mode menu on/off
Source Press “Source” to search for source.
Re-sync Automatically synchronizes the projector to the input source.
notee:
‡
Due to the difference in applications for each country, some regions may have different accessories.
‡
Due to generic remote, function is model dependent.
‡
Remote control number is for password used.
on-screen Display Menus
The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press (Menu) button on the Remote Control or Control Panel.
2. When OSD is displayed, use ▲▼ keys to select any item in the main menu. While making a selection
on a particular page, press ► or (Enter) button to enter sub menu.
3. Use ▲▼ keys to select the desired item and use ► or (Enter) button to view further settings.
Adjust the settings by using ◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as described above.
5. Press ► or (Enter) button to confirm.
6. To exit, press (Menu) button again. The OSD menu will close and the projector will automatically
save the new settings.
Main Menu
Setting Sub Menu