15
... English
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
Using the Remote Control
Power/Standby
4
Refer to the “Power On/Off the Projector” section on pages
10-11.
Re-Sync
4
Automatically synchronizes the projector to the input source.
/ -
4
Increases/decreases speaker volume.
Reset
4
Changes the adjustments and settings to the factory default
value.
Mute
4
Momentarily turns off the audio and video.
Keystone
/
4
Adjusts image distortion caused by tilting the projector (±16
degrees).
Page Up (Computer mode only)
4
Use this button to page up. This function is only available
when the projector is connected to a
computer via an USB cable.
Page Down (Computer mode only)
4
Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Freeze
4
Press “Freeze” to pause the screen image.
Four Directional Select Keys
4
Use
to select items or make adjustments to
your selection.
Menu
4
Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
Enter
4
Confirm your selection of items.
VGA
4
Press “VGA” to choose Analog RGB, component and HDTV
source.
S-Video
4
Press “S-Video” to choose S-Video source.
Composite
4
Press “composite” to choose Composite video source.
User Controls
