English 37
BASIC OPERATIONS
Configuring Signal Settings (for VGA input only)
In
OSD
menu, tap
to open
Signal
menu, then complete the following steps:
Tap
Automatic
to automatically adjust the image to its optimized frequency, phase, and position.
Tap ◄► on
Frequency
item to adjust the vertical noise of the image.
Tap ◄► on
Phase
item to adjust the horizontal noise of the image.
Tap ◄► on
H. Position
item to adjust image horizontal position manually.
Tap ◄► on
V. Position
item to adjust image vertical position manually.
Configuring Audio Settings
In
OSD
menu, tap
to open
Audio
menu, then complete the following steps:
Tap ◄► on
Sound Effect
item to select one of the available options: Standard, Meeting, Class, Movie, or User.
Note:
If the sound effect setting is set to
User
, you can customize audio settings by adjusting the bass and
treble level according to your preference.
Tap
Mute
to mute or unmute audio.
Note:
You can also mute or unmute audio by pressing the button on the remote control.
Tap ◄► on
Volume
item to adjust the volume level.
Tap ◄► on
Bass
item to adjust the bass level that is suitable for your room.
Note:
Bass level and Treble level can be adjusted only if the Sound Effect is set to
User
. In other sound effect
modes this parameter is preset and cannot be adjusted.
