English
28
USING THE DEVICE
Turning the Power On/Off
Powering on
Note:
After the power cord is properly connected, make sure the
Power
switch is set to ON (
I
).
Press the
Power
button to turn on the IFP. The LED indicator light turns blue, indicating it is ready to use.
Note:
You can also press the
button on the remote control to turn on the IFP.
Powering off
Press the
Power
button for 3 seconds to turn off the IFP. Press
OK
at the prompt to turn it off immediately or wait
for 10 seconds until the IFP turns off automatically.
When the LED indicator light turns red, this indicates that the IFP has entered standby mode.
Note:
You can also press the
button on the remote control to turn off the IFP.
The IFP still consumes power when it is in standby mode. It is highly recommended to unplug the
power cord from the power outlet if the IFP will not be used for an extended period of time.
