14
23
MODES
* MEMORY *
The Xplorer has 1000 memory locations with up to 65,000 hits per memory. Shown below are the 12 fields of data that can be stored in the
memory of the Xplorer.
1
Frequency in MHz
2
Hits
3
Time
4
Date
5
Audio ON/OFF
6
DTMF ON/OFF
7
Signal Strength
8
CTCSS
9
DCS
10
DTMF
11
LTR
MANUAL RECORDING
1.
To manually record data into memory press the SHIFT and HOLD/STORE button at the same time as a frequency is captured
while in SWEEP mode.
2.
All data that was present at the time of logging to memory will be stored even if it was not on the display at the time the signal
was captured.
AUTOMATIC RECORDING
1.
To enable automatic storing of data to memory the AUTO STORE function must be ON. Press the MODE/POWER button until
*CONFIG* is displayed. Press the UP/DOWN arrow buttons until AUTO STORE is displayed. Press and hold the FNCTN but
ton and press the UP./DOWN arrow buttons to turn ON/OFF.
