10
Clear Memory
1.
Press the FUNCTION button until CLEAR MEMORY is displayed.
2.
Press the UP ARROW button twice in rapid succession. The display will read EMPTY.
3.
To exit FUNCTION mode press the TEST button or the FUNCTION button until the test
mode is displayed.
Reaction Tune
The CD100 can be used to instantly tune a compatible receiver to the frequency it captures using the
CI-5 jack located on top of the unit and the proper interface cable.
1.
Press the FUNCTION button until INTERFACE TYPE is selected.
2.
Press the UP / DOWN ARROW button to select REACTION TUNE.
3.
Press the FUNCTION button until RECEIVER TYPE is displayed.
4.
Use the UP / DOWN ARROW buttons to select between AR8000 and CI-5. Switch to
AR8000 for interfacing to AOR receivers. Use CI-5 when interfacing to ICOM, RADIO
SHACK or OPTOELECTRONICS receivers.
Receivers Compatible for Reaction Tuning:
AOR 8000, AOR 8200 ICOM: R10, R7000, R7100, R8500, R9000, RADIO SHACK (OS456 / OS535)
OPTOELECTRONICS R11, OPTOCOM
Memory Tune
1.
Press the FUNCTION button until MEMORY 00 is displayed.
2.
Press the UP / DOWN ARROW key to scroll through memories.
3.
Each time a new frequency memory is displayed the receiver will re-tune to that frequency.
Operation
(Cont.)
