background image

 

 

X6R/V3R-FX-INTERCOM

 

7 / 33 

rev. 2.8 

 

CE/FCC-Conformity 

This  document  confirms  that  the  X6R/V3R-FX-INTERCOM  bearing  the  CE  (Communauté  Européenne

)

  label 

meets all requirements in the EMC directive 2004/108/EG laid down by the Member States Council for adjustment 
of legal requirements. Furthermore the product complies with the rules and regulations of the low-voltage directive 
2006/95/EG and the Restriction of Hazardous Substances Recast Directive 2011/65/EU (RoHS 2). This product 
bearing  the  CE  label  complies  with  the  following  standards,  ratified  by  CENELEC  (Comité  Européen  de 
Normalisation Electrotechnique): 

Electromagnetic compatibility – Product family standard for audio, video, audio-visual and 

entertainment lighting control apparatus for professional use 

EN 55103-1, Emission 

EN 55103-2, Immunity  

EN 60065, Safety requirements

 

 

FCC notice

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may cause undesired operation. 
 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 

to  Part  15  of  the  FCC  rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communication. Operation of this equipment in a residential area is likely to 
cause harmful interference, in which case you will be required to correct the interference at his own expense. 

Changes or modifications not expressly approved by Optocore GmbH could void the user’s authority to operate 
this equipment. 

Industry Canada Compliance Statement 

This Class[A] digital device complies with Canadian ICES-003. 
 

Avis de conformité à la réglementation d'Industrie Canada

 

Cet appareil numérique de la class[A] est conforme à la norme NMB-003 du Canada 

 

The  authorised  declaration  and  compatibility  certification  lies  with  the  manufacturer  and  can  be  viewed  on 
request. Responsible as manufacturer is: 

OPTOCORE GmbH, Alte Allee 28, 81245 Munich, Germany 

represented by Marc Brunke, Managing Director 

N.B.

 The awarding of the CE label confirms the compliance with legal directives issued for the manufacturer and 

marketing of electronic and electrical devices. As such the CE label is not a "seal of quality" but rather proof that 
the device bearing the CE label conforms with the electromagnetic compatibility standards laid down in the above 
named testing regulations. 

 
Munich, 11.12.2013 
 

 

 
Marc Brunke 

 

Summary of Contents for V3R-FX-INTERCOM


































Reviews: