X6R/V3R-FX-INTERCOM
20 / 33
rev. 2.8
Hardware Connection
Example 1 – Remote intercom key-panels, interfaces and wireless base stations
The following example demonstrates the use of X6R/V3R-FX-INTERCOM devices with intercom matrix systems.
An X6R-FX-INTERCOM is connected to eight four-wire ports of a central intercom matrix. The four-wire ports,
along with RS422 or RS485 control signals (device dependent), are distributed over the fully routable Optocore
redundant ring topology network to remote locations.
Intercom key-panels and various interfaces can be connected to the system at the remote locations.
Fig. 1: Signal distribution for intercom key-panels, interfaces and wireless base stations.
