SANE with Optocore
7 / 10
rev. 2.21.024
EXAMPLE 3: Two TP devices connected to DD4MR-FX, each with a single AES/EBU port enabled
In this example a DD4MR-FX Optocore unit is connected to two X6R-TP devices, each with one AES port
enabled.
This system would be configured as shown below:
1) In ID22 - Software Local Settings - Sane setup:
a. TP – ID 2: X6R-16MicIn
b. TP – ID 3: Generic, 16 Out
c. TP – ID 4: X6R-8MicIn/8LineOut
d. TP – ID 5: Generic, 16 In
2) In X6R-TP-16MI - Local Settings:
a. ID: 2
b. Parent ID: 22
c. AES port A: Generic, 16 Out
d. AES port B: Disabled
3) In X6R-TP-8MI/8LO - Local Settings:
a. ID: 4
b. Parent ID: 22
c. AES port A: Generic, 16 In
d. AES port B: Disabled
FX unit - Local Settings – Sane Setup
TP ID 2 - Local Settings
TP ID 4 - Local Settings
