V 1.00 - eng
15
LTBRZ3-C series
| INSTRUCTIONS MANUAL
The table below lists typical current consumption for analogue dimming line and is valid for a single
module.
Signal
Voltage
Current consumption
Analogue dimming
0 V
~ 0.000 mA
Analogue dimming
1 V
0.025 mA
Analogue dimming
5 V
0.125 mA
Analogue dimming
10 V
0.250 mA
Analogue dimming
24 V
< 2 mA
Table 12: Analogue dimming signal power requirements for a single unit.
When multiple illuminators are connected in daisy-chain operation, please consider the typical
current consumptions listed below.
Signal
Voltage
Current consumption
2 units
3 units
4 units
Analogue dimming
24 V
4 mA
6 mA
8 mA
Table 13: Analogue dimming signal power requirements for multiple units
.
10.6 Led indicator
LTBRZ3-C series is equipped with a RGB led indicator used to monitor both status and error
conditions. The table below describes the led behavior.
Led status and color
Illuminator status
Solid green
Power supply is present, illuminator is OFF.
Solid blue
Power supply is present, illuminator is ON.
Alternately flashing
Error condition is detected.
Table 14: LED indicator signalling behavior.
RGB Led indicator
